Sansui CA3000, BA3000 & TU9900 - The Holy Grail Hat Trick!

OK classic audio fanboys... this is it, these are the ones, the most amazing Holy Grail set of Sansui TOTL separates from the last time we celebrated America's Birthday. These Bicentennial 70's superstars are about as good as it gets and clearly surpass the performance of ANY other like components of their era. That's our opinion and we're sticking to it!

The Sansui BA-3000 has an ultra-conservatively rated power output of 170 watts per channel, minimum RMS, both channels driven into 8 ohms over a 20 to 20,000Hz bandwidth, with no more than 0'05 % total harmonic distortion; 340 watts, minimum RMS in mono.

Features Include:

Four jumbo heat sinks coupled directly to the power transistors eliminate the need for a cooling fan. LED Power/Protector indicator on front panel glows red when power is switched on, turns green to indicate safe operation; turns red to warn of potentially harmful conditions. BA3000 has all the safety features, subsonic filters and distortion-free toroidal coil winding power transformer. Killer power that jumps to attention once th gas is hit.

Specifications
Power output: 170 watts per channel into 8Ω (stereo), 340 watts into 8Ω (mono)

Frequency response: 5Hz to 100kHz

Total harmonic distortion: 0.05%

Damping factor: 100

Input sensitivity: 0.7V

Signal to noise ratio: 100dB

Speaker load impedance: 4Ω to 16Ω

Dimensions: 460 x 178 x 400mm

Weight: 22.6kg

Year: 1976

Next up - the Sansui CA-3000 is a stereo control preamplifier featuring advanced space-age design in every link of the circuit chain, for unprecedented accuracy. It has RIAA ± 0.2dB Equalization which is capable of meeting all the strenuous demands of contemporary disc recordings which feature extremely wide dynamic range. The CA3000 handles an extremely wide frequency response covering all musical signals with low distortion, no clipping or noise.

Features Include:

High input impedance and low output impedance, through newly-developed unit amplifier circuits: a differential amplifier at input, and an emitter-follower or SEPP buffer amplifier at output. Phono equaliser features a packed differential dual FET amplifier (with a matched pair of low-noise FET's) at the initial stage, and Class-A complementary SEPP amp at output. Full controls and connections for any combination you're likely to need.

Specifications
Frequency response: 10Hz to 100kHz

Total harmonic distortion: 0.03%

Input sensitivity: 3mV (MM), 130mV (DIN), 130mV (line)

Signal to noise ratio: 70dB (MM), 90dB (DIN), 90dB (line)

Channel separation: 60dB (MM), 60dB (line)

Output: 130mV (line), 30mV (DIN), 1.3V (Pre out), 8V (Pre out Max)

Dimensions: 460 x 178 x 373mm

Weight: 13.3kg

Year: 1976

Last up, the TU-9900 is designed to match the superb performance of the AU-9900 and AU-11000 amplifiers and although matched up with the AU series components, the TU mates perfectly with this combo. It features 3 dual-gate MOS FET, switchable sensitivity, signal generator and a low pass filter.

Specifications
Type: Mono/Stereo Tuner

Tuning Bands: FM, MW

Tuning Scale: Analogue

FM Tuning Range: 88 to 108 MHz

MW Tuning Range: 530 to 1600 kHz

Sensitivity: 1.5uV (FM)

Signal to Noise Ratio: 76dB (FM), 55dB (MW)

Distortion: 1.0% (FM)

Selectivity: 90dB (FM), 70dB (MW)

Frequency response: 30Hz to 15kHz (FM)

Output: 1000mV

Dimensions: 460 x 160 x 310mm

Weight: 9.6kg

Year: 1976

It's hard to explain just how incredible this trifecta truly is. The units are in INCREDIBLE fully serviced condition. The CA preamp has been totally re-capped and it's immaculate under the hood. The BA power package is ridiculously overbuilt and plays TO SPEC. The TU tuner has been recalibrated, tested fully and brings in signals tight and strong. These three are spectacular and if you've been waiting for the perfect classic Sansui stack to come along, your ship has arrived.

Sansui CA3000, BA3000 & TU9900 Classic Hat Trick: $6,599.00 plus sales tax and shipping when applicable

• These components have spent their entire life together, we would REALLY like to keep it that way. ESPECIALLY the PRE/Power pairing.
• We're sending these Pilot Freight or Private Delivery - call to discuss